Pair of Bitubo fork dampers

 Sorry, this part is no longer available.

27526485-z 27526485 GU27526485 27 52 64 85
 2752 6485 2752.6485 27.52.64.85

Fork seal kit containing 2 x fork seals for Ohlins forks

 This part is available by special order, request a quote

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs. For 16" wheel models

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Replaces Guzzi ref. 2952360 and 29526460. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

Fork dust cover

 This part is available by special order, request a quote

AP8123824

Also fits Aprilia RSV 2 1000, Aprilia, RSV 4 1000, Aprilia SL FALCO 1000, Aprilia TUONO 1000

Chromed fork stanchion for Marzocchi fork

Use fork seal SUA27584 with this stanchion

 This part is available by special order, request a quote

 32525410 GU32525410 32 52 54 10
 3252 5410 3252.5410 32.52.54.10

Chromed fork stanchion for Kaifa fork

Use fork seal SUA88788 with this stanchion

 This part is available by special order, request a quote

 887887 MG887887

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

The suspension on the V9 models is notoriously cheap, these shocks are an excellent suspension upgrade which will transform your V9. Fully adjustable damping and preload allows you to get your bike handling as it should.

Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V9.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete bespoke replacement Matris damper and spring assembly for Kaifa forks. This fork upgrade completely replaces your budget Kaifa fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your V7. Fully adjustable damping and preload allows you to get your bike handling as it should.

Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V7.

This kit is not suitable for Marzocchi forks (Mupo make a kit for these).

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote